 |
|
 |
|
LITE WEIGHT
30% lighter than a steel equivalent, moving the chair is more efficient and cost effective, both during venue installation and also during transportation. Customers tell us they save money on truck wear & tear, and the staff who move them are happier.
|
|
RUST-FREE FOR LONG LIFE
ALLOY frame and seat plate are made of Aluminum. Aluminum does not and can not rust. No rust eliminates the brown stains so often seen on painted steel chairs (especially around the rivet holes). It also reduces liability from potential breakages due to this corrosion. Click here for a detailed article on rust in chairs. All fittings are heavily rust protected and can be supplied in stainless on request.
|
 |
 |
|
 |
|
HIGH STRENGTH
There is no compromise on strength. View the certified strength test reports from Industrial Research Limited. The yield strength under static-load test is over 500 lbs downward pressure.
|
|
STACKS MORE STABLE
The Alloyfold II features a small crimp in the legs near the base so that in a stack the legs nest together. This means that the chairs "locate" or "nest" into each other not just with the plastic seat backs at the top, but also at the base of each chair. This ensures far greater stack stability.
|
| |
.jpg) |
|
 |
|
STACKS MORE COMPACT
When the Alloyfold II or Alloyfold 4 are folded the chairs interlock and stack flat for low-volume storage. When stacked flat workers can carry 10 under each arm and move large volumes very efficiently.
|
|
LONG-LIFE FINISH
The anodized aluminum frame does not chip or scratch easily, so the frames do not require maintenance such as annual paint touch-ups to keep them looking pristine. The anodizing process is not a coating, it is a chemical alteration of the surface structure and is extremely hard wearing.
|
| |
 |
|
 |
|
QUALITY PLASTICS
The plastics are 97% virgin polypropylene, which is strong and highly UV resistant. Some manufacturers use more "re-grind" and recycled blends that are brittle and less UV resistant
|
|
STRONG SLEDGE LEG
The dual sledge leg design on the ALLOYFOLD II is a good option for outdoor use because it doesn't sink into the ground. Also, there are no rubber end caps to replace.
|
| |
 |
|
|
|
COMFORTABLE FLEX
Aluminum has different characteristics from steel in that it is a more flexible material. When you sit on an ALLOYFOLD chair you notice immediately that it flexes and contours to your body shape, which increases comfort.
|
|
|
| |
